GB
Please read and comply with these
operating instructions prior to the
initial operation of your device.
Keep these operating instructions for
later use or for a subsequent owner.
Note
Modification of the device or manu-
facturing of attachments is not permit-
ted. Such modifications can result in
personal injury or malfunctions.
Repairs to the device may only be carried out
■
by appointed and trained personnel. For such
purposes, always use original spare parts from
Adolf Würth GmbH & Co. KG. This is to ensure
and maintain safe operation of the device.
Never point the device
towards any part of your
body, towards yourself or
towards other persons.
Always wear a suitable respiratory
filter/mask, safety goggles, ear
protectors, protective gloves and
protective clothing to protect you
body from contact with toxic
vapours, solvents or the processed
products.
Poisoning can occur with some paints containing
organic solvents due to the toxic vapours which
they give off.
Before starting work, check the proper
■
function, completeness and operational and
functional integrity of the device.
Do not use a faulty device.
Disconnect the compressed air supply before
■
carrying out any work on the device, during
work breaks and when the device is not in use.
8
For your safety
Failure to observe the operating instructions and
the safety instructions could result in damage to
the device and danger for the operator and other
persons.
In case of transport damage, inform your vendor
immediately.
Safety Instructions
Do not use the device if its integrity
■
may have been impaired as a result
of a collision or fall. This applies in
particular to parts subject to continuous loads,
to adjustable parts or to pressurised parts.
It is quite possible that impairments such as
fractures, cracks or similar phenomena may
not be directly recognisable.
• In this case do not use the device and
inspect and test it before using again. If in
doubt, contact your local dealer before
using the device again.
Such products could cause corrosion to galva-
nised parts that may result in explosive chemical
reactions.
Do not use inflammable liquids.
■
Avoid naked flames and sparks.
■
Never exceed the maximum working pressure
■
of 8 bar!
Use the device only in well-ventilated rooms.
■
Use only original Würth accessories and
spare parts.
WARNING - Prior to first use
always read the Safety instruc-
tions!
Fire or explosion hazard
Do not use solvents and/or halogen-
ated hydrocarbon-based detergents
(ethyl trichloride, methyl chloride, etc.).