Anjou AJ-CBL001 Guia Del Usuario página 6

1
①
②
3
5
Quick Installation Guide
1. Connect the power cable and adapter to the printer.
2. Press the Power Button to power it on (White light when it's on).
3. Remove the front cover.
4. Insert the ink cartridge into the printer.
1) Unpack the ink cartridge and remove the protective seal on the ink
nozzle. Do not touch the nozzle or copper-colored contacts.
2) Slide the ink cartridge at a slight upward angle into the slot with
the contacts facing down. Gently push it upward until it snaps into
place with a clicking sound. Make sure it's installed tightly.
2
5. Install the front cover back. Align the bulges and the holes in the
printer, push it from front to back.
4
05/06