Quick Start - Anjou AJ-CBL001 Guia Del Usuario

Quick Start

Prep your nails using the manicure
tools.
3
2
1
Apply four layers.
1）Base coat
2）White gel polish
2
2 Twice
3）Print gel polish
Place your finger on the nail holder
Press down and release to spring
back.
Note: Avoid scratching the
4
nail coats.
1
Dry using a UV lamp after applying
base coat and white gel polish
(60s for each layer). You can directly
print after applying print gel polish
without drying. After printing, please
3
dry for 90 seconds.
Select a pattern.
Tap Print.
Note: Remain still during
printing.
5
Press down again to release your
finger.
6
Apply a layer of top coat.
8
Note: For detailed instructions, please refer to the Video Tutorials
section on the nail printer. Video Tutorials
Dry with a UV lamp.
90s
7
Dry with a UV lamp.
90s
9
07/08