Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
en
1 Safety
1.2
Recommendations
1.3
Liabilities
16
Converter PCB module KPM
Caution
Only genuine spare parts may be used.
The converter PCB module KPM is used for operating
conventional, speed-regulated pumps with boilers
starting from the SGB E series.
With the converter PCB module KPM, the PWM signal
of the ISR LMS controller is converted into a 0–10 V
signal for actuating the speed-regulated pump.
See
Further information is included in the
Manual for the boiler as well as the Assembly
Instructions for the pump used.
1.3.1
Manufacturer's liability
Our products are manufactured in compliance with the
requirements of the various Directives applicable. They
are therefore delivered with the
documents necessary. In the interests of the quality of
our products, we strive constantly to improve them. We
therefore reserve the right to modify the specifications
given in this document.
Our liability as manufacturer may not be invoked in the
following cases:
Failure to abide by the instructions on installing and
maintaining the appliance.
Failure to abide by the instructions on using the
appliance.
Faulty or insufficient maintenance of the appliance.
1.3.2
Installer's liability
The installer is responsible for the installation and initial
commissioning of the appliance. The installer must
observe the following instructions:
Read and follow the instructions given in the manuals
provided with the appliance.
Install the appliance in compliance with prevailing
legislation and standards.
Carry out initial commissioning and any checks
necessary.
Explain the installation to the user.
Installation
marking and any
136153 - 02 - 02122019
Publicidad
Tabla de contenido
