BDR Thermea Group KPM Instrucciones De Montaje página 23

Fig.6 Assembly with mounting plate
7
136153 - 02 - 02122019
6
RA-0001673
6. Fasten the converter PCB module KPM to the mounting plate
(included in standard delivery) with two 3.9 x 13 tapping screws.
7. Fasten the mounting plate with the converter PCB module KPM to the
electrics panel with four 3.9 x 13 tapping screws and four spacers.
8. Install the cable set connection lines in the cable twist ties for the ISR
LMS controller.
9. Connect them in line with the connecting diagram (see reference
below).
For more information, see
Connecting diagram, page 19
5 Installation
Converter PCB module KPM
en
23