How to use
Plug fan directly into 120 volt AC outlet. A loose fit will cause overheating and damage the plug.
Cleaning / servicing instructions _________________________________________
BEFORE CLEANING THE FAN, UNPLUG THE POWER CORD. Remove front grille by removing
screws, (Do not remove rear grille). Clean grilles and blade with damp cloth. Avoid harsh
chemical cleaners. DO NOT IMMERSE THE MOTOR IN WATER. Re-attach front grille.
Allow to dry completely before use.
Excess dust accumulated on the vent slots of the motor can be easily removed with vacuum
cleaner. Your fan motor is permanently lubricated and requires no additional oil.
This product has a fuse for overload protection located in the power cord plug. A blown fuse
indicates an electrical overload.
If the fuse blows, unplug the fan, remove and replace the fuse as follows:
- Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling
on the cord.
- Select a suitable tool such as a small flat screwdriver or travel scissors.
- To open the fuse cover, slide open fuse cover on top of the attachment plug towards blades.
- Carefully remove fuse by prying it out.
- Risk of fire can result by using wrong fuse rating. Although the fan plug is marked 5 amp only,
a 2.5 amp fuse may also be used (fuse not included). If the replacement fuse blows, fan is
defective and should be returned to manufacturer.
- To close the fuse access cover, slide the access cover on top of attachment plug.
Warning:
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that
should hot be removed. Discard product if the attachment plug is damaged.
4
______
_________
Contenido
Información general ......................................... 6
Instrucciones de seguridad .............................. 6
Instrucciones para el ensamblaje de las
patas ........................................................... 6
Instrucciones para el usuario ........................... 7
Instrucciones de limpieza y mantenimiento ... 7
5