Daily Use - Zanussi ZNHN18FS1 Manual De Instrucciones

SWITCHING OFF
Keep touching the ON/OFF button (6) for 3
seconds.
All indicators light off.
TEMPERATURE REGULATION
Before regulating the temperature, it is necessary
to select the compartment (fridge or freezer).
The upper or lower cavity is selected by the
compartment selection button (6).
To select the freezer compartment touch the
compartment selection button (6) until LED
corresponding to the lower cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is -18°C.
To select the fridge compartment touch the
compartment selection button (6) until LED
corresponding to the upper cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is +4°C.
To set temperature:
1. Touch temperature regulator button (7).
Current temperature indicator blinks.
2. Any time you touch the temperature regulator
button (7), the setting moves by one position.
When you select a temperature, the LED
corresponding to selected temperature value
blinks for a while and the setting is fixed.
The set temperature will be reached
within 24 hours. After a power failure
the set temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze function is used to perform pre-
freezing and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects food
products already stored in the freezer compartment
from undesirable warming.

DAILY USE

POSITIONING THE DOOR SHELVES
To permit storage of food packages of various
sizes, the door shelves can be placed at different
heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
8
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete
pre-freezing.
To activate FastFreeze function press the
FastFreeze button (7) for 3 seconds. The
FastFreeze indicator switches on.
This function stops automatically after
52 hours.
It is possible to deactivate the function at any time
by pressing FastFreeze button (7) for 3 seconds
again. The FastFreeze indicator switches off.
HIGH TEMPERATURE ALARM
When there is a temperature increase in the freezer
compartment (for example due to an earlier power
failure), the freezer compartment indicator flashes
and the sound is on.
To deactivate the sound press any button.
The freezer temperature indicator LED continues to
flash until the normal conditions are restored.
If you do not press any button, the sound switches
off automatically after around one hour to avoid
disturbing.
DOOR OPEN ALARM
If the fridge door is left open for approximately 5
minutes, the fridge compartment indicator flashes
and the sound is on.
During the alarm the sound can be muted by
pressing any button. The sound switches off
automatically after around one hour to avoid
disturbing.
The alarm deactivates after closing the door.