Assembly And Use For The Single Serve Cup - Ninja BL830 Serie Guia Del Usuario

Assembly and Use for the Single Serve Cup

ASSEMBLY ASSEMBLY
Fig. 9 Fig. 10
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top.
2 Add ingredients to the single serve cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
3 Place the single serve blade onto the cup and screw
it on tightly until you have a good seal.
(Fig. 9)
4 Turn the single serve cup upside down and place it
onto the motor base, aligning the tabs on the cup
with the motor base. (Fig. 10) Turn clockwise until
the cup locks in place, the unit is ready for use.
(Fig. 11)
5 Turn the Variable Speed Dial to the Single Serve
icon. The single serve cup only operates at one
speed regardless of which number is chosen on the
dial. Press down on the "Start/Stop/Pulse" toggle
in short intervals until you have reached your
desired consistency. (Fig. 11)
Fig. 11
For best results, use short "PULSES"... Practice makes perfect!!
PULSE PULSE
Fig. 12
6 When you have reached your desired consistency,
turn the single serve cup counter-clockwise
(Fig. 12) and pull straight up to remove. (Fig. 13)
7 Turn the cup upright and remove the single serve
blade by twisting the blade assembly counter
clockwise.
8 Place the Sip & Seal
single serve drink cup, screw on to seal and enjoy!
9 Make sure that the motor base is unplugged when
not in use.
REMOVAL REMOVAL
Fig. 13
To-Go drinking lid onto the
™
www.ninjakitchen.com
14