EN
SAfETY AnD PROTECTIOn
The hedge trimmer is equipped
with a system anti-overload which
protects the tool against mechanical
damage if the blade is jammed. The
trimmer will stop cutting. Switch off
and unplug from the mains. Take
out the jammed object. Turn on and
then you can start cutting again.
SERvICInG - MAInTEnAnCE
Unplug from the mains before
checking, cleaning and
maintenance.
CLEAnInG – LUBRICATIOn
Of THE BLADES
Disconnect from the mains socket.
Wipe and lubricate the blades with
machine lubricant.
Lubrication will improve the
trimming performance and extend
the life of blade.
Use a wet soft rag and some soft
soap to clean the plastic housing.
Never immerse the machine into
water or liquid.
Do not use a detergent, alcohol,
gasoline, etc.
STORAGE Of THE HEDGE
TRIMMER
Always store the hedge trimmer
with its blade sleeve.
Keep it in dry place. Do not expose
to sunlight or water Lubricate the
blade again if storing for a long
time.
10
SHARPEnInG Of THE
BLADES
The blades generally do not need to
be sharpened under proper usage.
However, the sharpening of the
blades can be carried out by a
qualified professional if necessary.
ELECTRICAL SAfETY
Power tool plugs must match the
outlet.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
Use of a cord suitable for outdoor
use reduces the risk of electric
shock.
PERSOnAL SAfETY
Stay alert, watch what you are
doing and use common sense when
operating a power tool.
Do not use a power tool while
you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result
in serious personal injury.
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your
finger on the switch or energising
power tools thathave the switch
on invites accidents.
Dress properly.
Do not wear loose clothing or
jewellery.
Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving parts.
POWER TOOL
USE AnD CARE
Do not force the power tool.
Use the correct power tool for your
application.
The correct power tool will do the
job better and safer at the rate for
which it was designed.
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools.
Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
DISPOSAL AnD
THE EnvIROnMEnT
This product is covered by the
Waste Electrial and Electronic
Equipment(WEEE) regulations.
It should not be discarded with
normal household waste, but taken
to your local collection centre for
recycling. For further information,
please contact the local authority or
approved disposal agency.