Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe 31741180 Instrucciones De Montaje

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The fittings must be mounted in an insulated manner
and with sound insulation.
Assembly (see page 31)
Install body with G 3/4 outlet pointing downwards.
Depth of fitting: 68 mm to 96 mm.
extension set 28 mm
Note: When installation is complete ensure
that the mixer is turned off!
A Direct wall installation.
B Direct wall installation with 10 mm adjustable mount-
ing studs.
C Brick wall installation.
4
English
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Connections G 1/2:
The product is exclusively designed for drinking water!
Symbol description
Assembly see page 31
Do not use silicone containing acetic acid!
Adjustment (see page 32)
To adjust the hot water limiter. Using a hot
water limiter in combination with a continu-
ous flow water heater is not recommended.
Dimensions (see page 33)
Flow diagram
(see page 33)

Tub outlet

Shower outlet
Final assembly (see page 35)
Spare parts (see page 34)
Special accessories (order as an
extra)
extension set 28 mm #32498000
Test certificate (see page 40)
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 70°C
65°C
cold right - hot left