Piezas De Desgaste - ESAB Aristo Feed 3004 Instrucciones De Uso

Feed 3004

Piezas de desgaste

Item Ordering no. Denomination
HI1 0455 072 002 Intermediate nozzle
0456 615 001 Intermediate nozzle
HI2 0469 837 880 Outlet nozzle
0469 837 881 Outlet nozzle
HI3 0191 496 114 Key
HI4 0215 701 007 Locking washer
HI5a 0459 440 001 Motor gear euro
Item Ordering no.
HI5b 0459 052 001 Feed/pressure rollers
0459 052 002 Feed/pressure rollers
0459 052 003 Feed/pressure rollers
0459 052 013 Feed/pressure rollers
0458 825 001 Feed/pressure rollers
0458 825 010 Feed/pressure rollers
0458 825 002 Feed/pressure rollers
0458 825 003 Feed/pressure rollers
0458 824 001 Feed/pressure rollers
0458 824 002 Feed/pressure rollers
0458 824 003 Feed/pressure rollers
The rollers are marked with wire dimension in mm, some are also marked with inch.
Item Ordering no.
HI6 Washer
HI7 Screw
HI8 Screw
HI9 Washer
HI10 0469 838 001 Cover
HI11 0458 722 880 Axle and Nut
HI12 0459 441 880 Gear adapter
HI13 0455 049 001 Inlet nozzle
HI14 0458 999 001 Shaft
HI15 Nut
HI16 0458 748 002 Insulating washer
HI17 0458 748 001 Insulating bushing
Item Ordering no.
HI18 0156 602 001 Inlet nozzle
Welding with aluminium wire
In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire MUST be
used, It is recommended to use 3 m long welding gun for aluminium wire, equipped with appropriate
wear parts.
bm50whj1
Notes
Drive gear
Denomination Wire type
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Cored
Cored
Cored
Cored
Al
Al
Al
Use only pressure and feed rollers marked A2, R2 or S2.
Denomination
Ø 16/5x1
M4x12
M6x12
Ø 16/8.4x1.5
Ø 3mm for 0.6-1.6mm Fe, Ss, Al and cored wire
M10
Denomination Wire type
Fe, Ss, Al & Cored
Wire type Wire dimensions
Fe, Ss & cored
Al
Fe, Ss & cored Ø 2.0 mm steel for 0.6-1.6 mm
Al Ø 2.0 mm plastic for 0.8-1.6 mm
Wire dimensions
Ø 0.6 & 0.8 mm
Ø 0.8 & 1,0 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.4 & 1.6 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.2/1.2 mm
Ø 1.2 & 1.4 mm
Ø 1.6 mm
Ø 0.8 & 0.9/1.0 mm
Ø 1.0 & 1.2 mm
Ø 1.2 & 1.6 mm
Notes
Wire dimensions
Ø 2 mm plastic for 0.6-1.6 mm
- 20 -
Groove Roller
typ markings
V 0.6 S2 & 0.8 S2
V 0.8 S2 & 1.2 S2
V 1.0 S2 & 1.2 S2
V 1.4 S2 & 1.6 S2
V-Knurled 1.0 R2 & 1.2 R2
V-Knurled 1.2 R2 & 1.2 R2
V-Knurled 1.2 R2 & 1.4 R2
V-Knurled 1.6 R2 & 2.0 R2
U 0.8 A2 & 1.0 A2
U 1.0 A2 & 1.2 A2
U 1.2 A2 & 1.6 A2