DIVERSITECH CP-22LP-P Manual Del Usuario página 10

Installation
6. Electrical Connection and Safety Switch
6
6a
1
6a. Conduit Connection
1. Loosen conduit fitting nut
2. Rotate fitting for desired application
3. Route wires through conduit
4. Align conduit and insert conduit into conduit fitting
5. Tighten conduit screws.
WARNING: Risk of Electric Shock
This pump must be properly connected to power following the National Electric
Code (NEC). Failure to follow these warnings will void the warranty and could
result in a fatal electric shock. A green LED will indicate if power is available. The
pump is supplied with a grounding conductor. To reduce the risk of electric shock,
be certain that it is connected to ground. Disconnect power before working on
or around the pump.
10
2
B G W Y
Com
Run
B G W YB
B G R
B G R
5
120V
230V
Y
Com
Run
YB