Grill Cart - SEVERIN SU 8125 SEVO Instrucciones De Montaje

GB

Grill cart

Dear Customer,
Before using the appliance, read the following assembly
instructions carefully and keep this manual for future
reference. The grill cart must only be used by persons
familiar with these instructions.
Familiarisation
1. Side storage tables, 2 pieces
2. Grill cart frame
3. Support legs wheel-side, 2 pieces
4. Wheels, 2 pieces
5. Wheel axle
6. Frame for storage rack
7. Support legs, 2 pieces
8. Storage rack
Not shown:
8 bolts, big
4 bolts, small with nut
2 wheel covers
2 cotter pins
4 towel hooks
Important safety instructions
∙ Caution: Keep any packaging materials well away from
children – these are a potential source of danger, e.g. of
suffocation.
∙ Do not move the grill cart by pushing at the side table.
Take off the side table first and always grip the frame.
∙ Do not use the grill cart to transport any items.
∙ Ensure that the grill cart is not stored outdoors, or in any
other location where it might be subjected to extremes of
temperature or high humidity.
∙ The grill cart must not be used with any grill other than
the one supplied.
∙ This grill cart complies with all binding CE labelling
directives.
Before using for the first time
∙ Remove any packaging materials and stickers from the
grill cart.
Grill cart assembly
∙ For assembly, a Phillips screwdriver is needed.
∙ Prior to assembly, check that all parts are complete as
listed in the Familiarisation section.
∙ Assembly:
∙ Place the grill cart frame upside-down on the floor.
∙ Insert the four support legs into the housing and
secure each leg with two big bolts. The two support
legs with additional wheel openings are fitted on the
side without the stainless-steel hooks.
∙ Turn the frame with the support legs upright.
∙ Fit the plastic frame of the storage rack and secure it
on all four support legs, using the corresponding bolts
and nuts; then fit the storage rack.
∙ Slide the wheel axle through the openings on the
support legs and put on the wheels. Secure each
wheel with one of the cotter pins, and clip on the
wheel covers.
∙ Fit the side tables onto the corresponding metal pins.
∙ If required, hang the towel hooks on the stainless-steel
bar.
∙ Ensure that the grill cart is stable. Check the bolts
regularly for firm connection.
∙ Place the assembled grill on top.
Caution:
∙ Do not exceed a maximum load of 3 kg for the side
tables, and 20 kg for the storage rack.
∙ If you need to move the grill, remove the table on the
side opposite from the wheels and grip the frame.
Cleaning and care
∙ Clean the grill cart as necessary.
∙ Before cleaning the cart, allow the grill to cool down and
take it off.
∙ Do not use metallic pads or abrasive cleaning agents.
∙ The grill cart may be cleaned with a damp cloth and a
little detergent.
Guarantee
This product is guaranteed against defects in materials
and workmanship for a period of two years from the date
of purchase. Under this guarantee the manufacturer
undertakes to repair or replace any parts found to be
defective, providing the product is returned to one of our
authorised service centres. This guarantee is only valid
if the appliance has been used in accordance with the
instructions, and provided that it has not been modified,
repaired or interfered with by any unauthorised person, or
damaged through misuse.
This guarantee naturally does not cover wear and tear,
nor breakables such as glass and ceramic items, bulbs
etc. This guarantee does not affect your statutory rights,
nor any legal rights you may have as a consumer under
applicable national legislation governing the purchase
of goods. If the product fails to operate and needs to
be returned, pack it carefully, enclosing your name and
address and the reason for return. If within the guarantee
period, please also provide the guarantee card and proof
of purchase.
5