2.1
Functioning of the hob
The devices for the functioning of the individual heating elements are in the
controls area of the hob.
ELC CONTROL PANEL
2
3
2
4
PENTA CONTROL PANEL
4
1
ON - OFF
2
COOKING AREA
SELECTION
3
POWER LEVEL
SETTING
4
TIMER ACTIVATION
Before connecting the hob to the mains, make sure that the controls area is
clear and clean.
2.2
Switching on the hob:
Before being able to switch on the cooking areas, the hob must be switched on
by touching the symbol
The plan remains active for approximately 10 seconds, within which the cooking
zones can be switched on.
Choose the zone to be switched on by touching the relative symbol (2), the
display shows " " at this point act in the following way:
•
In the case of ELC CONTROLS, once the cooking zone has been selected,
the power level can be selected using the + and - keys (3)
•
In the case of PENTA CONTROLS, once the cooking zone has been se-
3
1
2
2
(ON-OFF), the displays show "
INSTRUCTIONS FOR USE
2
2
2
2
3
5
CHILD LOCK
ACTIVATION
6
DOUBLE/TRIPLE
ZONE ACTIVATION
7
STOP & GO
FUNCTION
2
6
5
1
".
25 / GB