Sleep Timer; Display Illumination - Makita MR001G Manual De Instrucciones

2. The display will flash both the snooze symbol and the
alarm symbol. The snooze function can be repeatedly
during one hour that the alarms are active.

Sleep timer

The sleep timer will automatically switch off the radio after
a preset time has elapsed.
1. Press and hold the Power button for more than 2
seconds, followed by a beep tone, the display will cycle
through the available sleep time in the order 60-45-
30-15-120-90-60. Release the Power button when the
required sleep time appears on the display. The sleep
symbol will appear on the display and the radio will play
the last station selected.
2. To cancel the sleep function, press the Power button.
The sleep symbol will disappear and radio is off.

Display illumination

Press any buttons or rotate Tuning control knob will
illuminate the LCD display for approx. 15 seconds.
During scanning stations and alarm activated will also
automatically illuminate the display.
AUXILIARY INPUT SOCKET
A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Band button until
"AU" is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
audio device and then adjust the volume on the radio
as required.
Note:
Audio cord is not included as standard accessories. AUX
can't be activated as alarm source.
MAINTENANCE
CAUTION:
●  N ever use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
●  D o not wash the radio with water.
SPECIFICATIONS
Power requirements
AC power adapter
Battery
Frequency coverage
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimensions
(L x W x H)
Weight
12 ENGLISH
DC 12V 0.7A, center pin
positive
UM-3 (AA size) x 2 for back up
Slide battery: 10.8V - 36V
FM 87.50-108 MHz
(0.1MHz/step)
AM (MW) 520-1,710 kHz
(10kHz/step)
3.5inches 8ohm x 2
10.8V-12V max: 1.2W x 2
14.4V: 2.2W x 2
18V: 3.5W x 2
36V: 5W x 2
3.5mm dia. (AUX IN)
FM: Built-in antenna
AM: bar antenna
278 x 170 x 298mm
4.3Kg
(without battery)