KENMORE ELITE 722.1469 Serie Manual De Uso Y Cuidado página 25

Problem
Black or gray marks on
dishes.
Spots and filming on
dishes.
Noise
Possible Cause
Aluminum items rubbing dishes during
cycle.
Low water temperature.
Wrong amount of detergent used.
Overloading.
Improper loading.
Insufficient water pressure.
Insufficient detergent.
Rinse aid dispenser is empty.
Extremely hard water
Hard water buildup in the tub
Some level of noise is normal during
operation.
The dishwasher is not level.
Nozzle arm knocking against dishes.
Solutions
• Reposition the dishes.
• Water supply should be at least 120 °F for
best wash performance.
• Use the recommended amount of detergent.
• Do not overload the dishwasher.
• See the Operation section.
• Water pressure should be between 20 and 80
psi.
• Add the recommended amount of detergent.
See the Operation section.
• Refill rinse aid dispenser.
• The best way to eliminate spots on your dishes
is to install a whole house water softener in
your home. If a water softener is already
installed or you do not plan on installing one,
try adding the Extra Rinse option as part of
the wash cycle to help minimize this condition.
To add an extra rinse to the cycle, select the
wash cycle and then press Rinse Options.
NOTE
Selecting Extra Rinse will increase cycle
times and water usage.
• Remove all dishes, silverware and silverware
holder from dishwasher. Only racks should
remain in tub. For best results, use citric acid
powder (can be found in canning sections
of most grocery stores or online). Measure
3 tablespoons (45 g) of citric acid powder.
Fill main wash compartment with measured
powder. If you cannot find citric acid powder,
pour approximately 1 ¾ -2 cups (400-500mL)
of white vinegar into shallow bowl and place
in lower rack. Run Normal cycle with Extra
Rinse and Sanitary options. DO NOT USE
DETERGENT.
• Detergent cover opening.
• Drain pump at the beginning of drain cycle.
• Adjust leveling feet.
• Reposition the dishes.
25