Set Multi; Set Iso; Set Video Length; Set Video Sound - Braun BLACK300 Manual Del Usuario

Ocultar thumbs Ver también para BLACK300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53

4.1.11 Set Multi

This parameter affects the number of pictures taken for each triggering in the camera
mode. It has four values: "1 Photo", "3 Photos" "6 Photos" and "9 photos". Its default
value is "1 Photo". The following shows how to set photo burst to 3 Photos, provided
that the previous option is 1 Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Multi.
c) Press RIGHT to select 3 pictures.
d) Press OK to save the current setting, then press MENU to return to info
display.
e) Press MENU to cancel setting and return to info display

4.1.12 Set ISO

This menu could only help you get a better photo at night, there are 3 values:
100,200,400.
a) Press MENU to display the setting menu.
b) Press DOWN to select ISO400.
c) Press OK to save the current setting, then press MENU to return to info
display.
d) Press MENU to cancel setting and exit.

4.1.13 Set Video Length

The following shows how to set video length to 30 Seconds, provided that the
previous value is 10 Seconds:
a) Press MENU to display the setting menu.
b) Press DOWN to select Video Length
c) Press OK to save the current setting, then press MENU to return to info
display.
d) Press MENU to cancel setting and exit.

4.1.14 Set Video Sound

The following shows how to turn off the sound of the video:
a) Press MENU to display the setting menu.
b) Press DOWN to select Voice.
c) Press RIGHT to display the VOICE setting Interface.

4.1.15 Set Delay

This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will
not react to the motion of human (or animals). The minimum interval is 1 second, it
means the PIR works all the time and media is taken almost continuously. The
maximum interval is 30 minutes, it means the PIR will be disabled for 30 minutes after
each triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval Time as 1 minute provided
13

Publicidad

Tabla de contenido
loading

Tabla de contenido