Getting Started - DragonTouch Vision 4 Lite Manual Del Usuario

EN

GETTING STARTED

Welcome to your Dragon Touch Vision 4 Lite. To capture videos and photos,
you need a microSD card (sold separately) to start recording.
microSD Cards
Please use brand name memory cards that meet these requirements:
• microSD, microSDHC or microSDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Format the microSD card before using the camera. To keep your microSD card in
good condition, reformat it on a regular basis. Reformatting erases all your
content, so make sure to offload your photos and videos before reformatting.
2. FAT32 format microSD card stops recording when the file size reaches 4GB and
starts to record again on a new file.
Powering On and Off
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is on. When information appears on the screen, your camera is on. When
the camera is on, press and hold the Power button again to power off.
Switching Modes
Turn on the camera, press the Mode button to switch to video or photo mode.
Press and hold the OK button to enter the setting menu, choose the
and press the OK button again, there are more shooting modes available. Press the
Mode button to exit.
Turning On and Off Wifi
To turn on the camera, press and hold the Up button to turn on Wifi, the Wifi name
and password will appear on the screen. Press the Up button again to turn off Wifi.
5
icon