Care And Cleaning - Hamilton Beach 58242 Manual De Instrucciones

Care and Cleaning

1. Unplug.
2. Remove Blender Jar and Lid. Rotate Jar Collar counterclockwise until Collar
and Cutting Blade Assembly come apart from Blender Jar.
OR
3. Remove Personal Jar from base. Rotate Collar counterclockwise until Collar
and Cutting Blade Assembly come apart from Personal Jar.
4. Wipe Blender Base, control panel, Food Chopper Attachment and cord with
a damp cloth or sponge. To remove stubborn spots, use a mild, nonabrasive
cleanser.
5. Blender Jar, Personal Blender Jar, Lid, Jar Collar, and Cutting Blade Assembly
are dishwasher-safe.
6. DO NOT use "SANI" setting when washing in the dishwasher. "SANI" cycle
temperatures could damage your product. Parts may also be washed with
Troubleshooting
Ingredients will not mix properly.
• Check to see if enough liquid has been added to ingredients. Mixture should be
fluid and free-running at all times.
• Solid pieces are too large.
• Container is too full. Do not fill past highest (6.5 cups/1.5 L) graduation marking.
• Cutting Blade Assembly blades are not sharp or are damaged. Inspect container
and Cutting Blade Assembly daily.
• Select speed to create a fluid blend.
Blender smells like it is burning.
• Turn off Blender and allow unit to cool.
• Although motors are tested during the manufacturing process, heavy use may
cause curing of motor windings. The smell may quickly dissipate after a few
heavy uses.
• If smell continues after additional heavy uses, call our customer care center.
10
w WARNING
Electrical Shock Hazard. Disconnect power before cleaning. Do not
immerse cord, plug, base, or motor in water or other liquid.
w WARNING
Burn Hazard. Metal parts under blender jar get hot after extended use.
hot, soapy water. Rinse and dry thoroughly. Do not soak.
Cleaning Blender Jar:
1. Add 5 cups (1.2 L) warm water and add two drops of dish soap. Press PULSE
button. Rinse and dry thoroughly.
2. To clean after blending oily foods, sprinkle baking soda in blender. Add 1 cup (237 ml)
white vinegar. Mixture will bubble. When bubbling subsides, add 1 1/2 cups (355 ml)
water. Wash any remaining residue with dish soap and water. Rinse and dry thoroughly.
Cleaning Personal Blender Jar:
1. Add 1 cup (237 ml) warm water and 1 drop of dish soap.
2. Blend for 30 seconds.
3. Press Power ( ) Button to stop blending.
4. Remove Jar from Base and remove Collar. Rinse and dry.
There is grease around bottom of Blender Jar or on countertop.
• Monitor problem and source. This may indicate an issue with Jar bearings.
• Call our customer care center if condition persists.
Food Chopper S-Blade not turning.
• Make sure Lid and Chopper Bowl are properly installed or the Food Chopper will
not operate.