Keep this instruction sheet for future reference, as it contains
important information. Discontinue the use of the gate if it
becomes damaged, broken, or disassembled.
Adult assembly and setup is required to mount the gate and
remote, and install batteries.
Tools required for hardware installation:
Electric drill,
screwdriver (tools not included)
Tools required for clamp installation:
Phillips screwdriver (not included); and clamp tool (included)
Tools recommended, but not included:
Pencil, tape measure and level
1,5V
x2
AA
Remote requires two AA (LR6) alkaline batteries (included).
(LR6)
1,5V
x3
Gate requires three AA (LR6) alkaline batteries (included).
AA
(LR6)
To clean, wipe with a damp cloth.
Do not immerse.
Children have died or been seriously injured when gates are
not securely installed.
• ALWAYS install and use gate as directed using all required parts.
• STOP using when a child can climb over or dislodge the gate.
• NEVER use to keep child away from pool.
BEFORE YOU BEGIN
3
/
"(4,76 mm) drill bit, hammer and Phillips
16
WARNING
3