Wired Connection - PNI House WiFi550 Manual De Usuario

2. Click "+" to establish a link between 2 cameras.
3. There are two types of camera connection:
• One by one: CH3 → CH2 → CH1 → NVR
• Linked directly to the NVR: CH7 → NVR, CH8 → NVR
After establishing the links, click Save.
Note: The repeater camera must be located in an area with a good signal without obstructions.
To delete a camera connected by Repeater:
Go to the Cascading interface above, left-click on the camera you want to delete from the link scheme, choose
Delete, then Save.
The camera that was deleted from the scheme will connect directly to the NVR automatically after 30 seconds.

WIRED CONNECTION

In some situations, when it is difficult to make a wireless connection between NVR and the cameras due to
obstructions or weak signals, you can call the cable connection.
1. Connect the camera and NVR via Ethernet cable directly or through a switch.
2. In the main interface, right-click - IP Camera - click on the "+" icon - Search. Select the desired IP, click
on the "settings" icon - Modify IP. Delete the cameras you do not want to add, double-click on the IP you
want to add to complete the connection.
7
EN