Abicor Binzel CAT3 PRO CR Manual Del Usuario página 42

10 Troubleshooting
Fault
The CAT3 PRO
does not reset to
the zero position.
CAT3 PRO
switches but there
is no fault.
EN - 20
Cause
• Mounted load is too heavy.
• Mechanical defect.
• Attachment parts (bracket etc.)
not correctly connected.
• Mounted load is too heavy.
• Robot speed is too high.
• Switch or helix cable is
damaged.
CAT3 PRO
Troubleshooting
• Reduce the mounted load.
• Observe the data provided
by the manufacturer.
• Send the CAT3 PRO for
repair.
• Check if the attachment parts
are properly connected.
• Adapt the load to the
specifications.
 3.1 Technical data on
page EN-7
• Replace the switch or helix
cable.
BAL.0843.0 • 2021-02-26