Metabo HPT C 12FDHB Instrucciones De Seguridad Y Manual De Instrucciones página 29

Position the crown molding so that the lower surface (Ⓐ in Fig. 23) contacts the fence
as in Fig. 32.
Bevel angle scale
Miter angle
scale
Turntable
Fence
Ⓑ
Cutting method of crown molding without tilting the saw blade
Crown molding vise ass'y
(Optional accessory)
6 mm knob bolt
(Optional
accessory)
6 mm wing bolt
Crown molding stopper (L)
(Optional
(Optional accessory)
accessory)
Head
Base
Fig. 29
Ⓐ
Table on base
Fig. 31
6 mm knob bolt
(Optional accessory)
Fig. 33-a
Bevel angle scale
Sub fence (L)
Base
Fence
Ⓐ
(1) Crown molding stopper (L) and (R)
(Optional accessories) allow easier
cuts of crown molding without tilting
the saw blade. Install them in the
base both-sides side to be shown in
Fig. 33-a. After inserting Tighten the
6 mm knob bolts to secure the crown
molding stoppers.
Crown molding
stopper (R)
(Optional
accessory)
English
Head
Miter angle scale
Turntable
Fig. 30
Ⓑ
Table on base
Fig. 32
29