Star Ng Grinding - Mahlkonig E80 SUPREME Instrucciones De Uso

Star ng grinding

Grinding according to a recipe
1. Select the desired recipe by turning the controller (3) (see the "Selec ng
recipes" chapter).
2. Insert the portafi lter between the portafi lter intake (12) and the portafi l-
ter support (10) un l it touches the start bu on (11).
The grinder starts the grinding process automa cally, it runs for the set
grinding me and then stops. During the grinding process, the remaining
grinding me is shown on the display (14).
3. The LED ligh ng changes to green and signals that the grinding process
has been completed.
Remove the portafi lter.
Manual grinding
Using the start bu on
1. Insert the portafi lter between the portafi lter intake (12) and the portafi l-
ter support (10) un l it touches the start bu on (11).
The grinder starts the grinding process automa cally when the start but-
ton is triggered. During the grinding process, the remaining grinding me
is shown on the display.
2. Remove the portafi lter from the portafi lter intake when you wish to end
the grinding process before the grinding me is up.
Using the upper bu on
1. Insert the portafi lter between the portafi lter intake (12) and the portafi l-
ter support (10) un l before it touches the start bu on (11).
2. Press the upper bu on (21) to trigger the grinding process manually.
3. End the grinding process by no longer pressing and holding the upper
bu on.
Manual grinding using the upper bu on or the start bu on al-
lows you to add very small quan
when grinding using a recipe.
E80 SUPREME | EN
es of ground coff ee to a shot
55