Hose Connection & Leak Checking - Weber Spirit E-315 Manual Del Propietário

Hose Connection &
Leak Checking
Connect the Hose to the Gas Supply
A quick-disconnect fitting connects your grill to
the gas supply. Gas will not flow unless the quick-
disconnect is properly engaged.
1) Check that all burner control knobs are in the off
position. Check by pushing in and turning knobs
clockwise (A).
2) Starting from inside the cabinet, route the flexible
gas hose out of the opening in the rear panel (B).
3) Slide the collar of the quick-disconnect back (C).
4) Push male fitting of the hose into the quick-
disconnect and maintain pressure. Slide the collar
closed (D). If it does not engage or lock, repeat
procedure. Proceed to "CHECKING FOR GAS
LEAKS".
A
B
C
D
BARBECUE
MITTS
When in doubt, wear them. The good
ones are insulated and protect
both hand and forearm.
9