Door Panel Installation - OVE BETHANY Manual Del Usuario

1. Install the door rollers (H) onto the door panel (J) with their own bolt and nut, do not strongly tighten yet.
2. Insert the door bottom seal strip (O) onto the door panel (J).
3. Gently hang the door panel by its 2 top rollers on the support bar (F) and make sure to place the bottom of
the door inside the guide (Q).
4. Adjust the level of the glass panel using the eccentric mechanism of the rollers. Finally, Use a ratchet to
strongly tighten the bolts. Put the caps (AA) onto the door rollers (H).
5. Install the magnetic door seal strip (I) on the door's closing end. Place the magnetic strip (N) and the wall
track (B1) onto the magnetic door seal strip (I).
6. Close the door and level the track (B1), then mark the position of the wall track (B1) on the wall.
1
H
J
3
H
F
5
J
I
N

DOOR PANEL INSTALLATION

B1
14
2
J
O
4
AA
6
B1
J