Assembly - KNOVA KN CP-2042B Manual Del Usuario

ASSEMBLY

1. To assemble, first place the base plate upside down.
Then attach the four casters to the plate using the holes
provided and tighten with the wrench.
2. Position the collector body and fan / motor assembly into
place. Secure it to the base plate using the nuts and
washers provided, as shown in figure 2.
3. Next, mount the outlet (I) to the collector body as shown
in figures 3 and 4.
Fig. 3
Fig. 1
Fig. 2
(I)
5
4. The collector support can now be mounted to the base
plate as shown in figure 5.
Fig. 5
Fig. 4