KNOVA KN CP-2042B Manual Del Usuario página 8

ASSEMBLY
9. Place the collector and filter bags (h) onto the collector
and secure with the belts as shown in figure 11.
10. After the bags
are secured,
the upper bag
should hang
from the upper
bag support as
in figure 12.
11. The shutter can now be placed on the intake hole of
the fan / motor assembly as shown in figure 13.
(h)
Fig. 11
Fig. 12
Fig. 13
12. Install the inlet shutter to the collector fan / motor
assembly using a 3/16" pan flange head screw.
Tighten with a screwdriver, as shown in figure 13.1.
13. The dust collector is now ready for use. Before
connecting to a power source, be sure the power
source is properly grounded and is the correct
voltage and amperage.
7
Fig. 13-1