Technical Specifications; Safety Instructions - FLORABEST FSG 85 C2 Traducción Del Manual De Instrucciones Original

Technical specifications

Chain sharpener ............ FSG 85 C2
Nominal input voltage ........ 230 V~, 50 Hz
Power consumption ............... max. 85 W
Rated resting period ...........approx. 5 min
Safety class .....................................
Mechanical rating ............................IPX0
Idle-running speed n
Disk speed .................... max. 27.8 m/s*
Adjustment angle .............. 35° left / right
For saw chains
with link sizes ... 6.35 / 8.255 / 9.52 mm
Dimensions grinding disk
external diameter ...................Ø 104 mm
diameter of bore ......................Ø 22 mm
thickness .................................3.2 mm
Weight (incl. accessories) .. approx. 2.6 kg
Sound pressure level
(L ) ........................ 68 dB(A); K
pA
Sound power level
(L ) ..................... 72 dB(A); K
WA
Vibration (a ) ...........0.8 m/s
h
* The grinding disk must be able to withstand
a circulation speed of minimum 27.8 m/s.
Is the max. rotation speed on the grinding
disk too small in contrast to the appliance the
grinding disk can break.
**
Do not operate the equipment for longer
than 15 minutes without interruption; then
take a rest break of 5 minutes.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
(S2: 15 min)**
................ 5000 min
0
(1/4" / 0.325" / 3/8")
pA
WA
; K=1.5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
II
Warning:
The vibration emission value may
-1
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
=3 dB turned off and times when the tool
is turned on but is running idle).
=3 dB
2

Safety Instructions

WARNING!
When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
and the risk of injury and fire.
Read all these instructions before
attempting to operate this product
and save these instructions.
GB MT
51