Tabla de contenido
Publicidad
9
10
11
⅜"
10
1
2.5 mm
⅝"
English
(1) Tighten the mounting nut and tensioning screws.
() Push the spout over the tee and escutcheon.
Tighten the spout screw using a .5 mm Allen wrench.
Connect the hoses to the valves.
Tighten the hose nuts using two wrenches, as shown.
Do not allow the hoses to twist.
A twisted hose may become
loosened from the spout, causing
a leak.
Install ½" supply lines (not included) on the hot and
cold valves.
Publicidad
Tabla de contenido
