Front Wheel Assembly; Rear Wheel Assembly - The First Years Burst S530 Manual De Instrucciones

Section 4 - Stroller Assembly - continued
2. Attach Parent Console:
A. Snap one side of the parent console onto the
1
pin on the handle tube . Then rotate parent
console and pull out on side and snap onto the
2
pin on the handle tube .
B. Tuck fabric up into the front of the
parent console.
3. Canopy Assembly:
A. Push canopy clip onto the mount until it
clicks into place.

4. Rear Wheel Assembly:

A. Slide the rear wheel axle through the hole
at the bottom of the rear leg until
it is all the way through the opposite side.
7
4. Rear Wheel Assembly - cont'd:
2 1

5. Front Wheel Assembly:

Section 4 - Stroller Assembly - continued
B. Slide the rear wheel on the axle, then slide
the washer on the axle, then attach the steel
pin and push through the hole in the axle.
Finish by snapping on the hubcap.
C. Repeat for opposite side.
A. Gently lay the stroller backwards to allow
easy access to the front wheel pivot tube.
B. Line up the front wheel pivot assembly
and slide it on the front pivot tube until
it locks in place. Hold onto the bellows
to keep in place as you slide it on.
Note: Pull on the pivot to ensure it is
locked.
8