Publicidad
Idiomas disponibles
Idiomas disponibles
21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style, custom pump, heater
Fixture*:
Bathing well:
Basin area, bottom
43" (109.2 cm) x 20-1/2" (52.1 cm)
Basin area, top
53-1/2" (135.9 cm) x 32-1/8" (81.6 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
58-1/2" (148.6 cm) x 40-1/2" (102.9 cm)
Pump:
1-speed
Heater
1.5 kW
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1047165-1-D
Pump/Control Access
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1112-HB
V
Hz
A
120
60
7.5
120
60
12.5
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/2"
42" (106.7 cm)
(3.8 cm)
19-1/2"
(49.5 cm)
1-1/2" OD
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (170 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
Publicidad
