Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
Process Controller
pT100 probe with wire and handle
Model:
Power supply:
Electrical power (W):
Weight (Kg):
External Fuse:
Timed operation:
Temperature range:
J
.P. SELECTA s.a.u.
CODE 80374 REV 0
1. General Information
•
Handle the parcel with care. Unpack and check that the contents coincide with
the packing-list. If any part is damaged or missing, please advise the distributors
immediately.
•
Do not install or use the equipment without reading this handbook first. This
instruction manual must be attached to the equipment and must be available for
all users.
•
If you have any doubts or enquiries, contact with J.P. SELECTA's technical
service.
•
Do not use the equipment in explosive, flammable or corrosive atmospheres.
2. Packing list
3. Technical specification
3000896
110VAC 230 VAC 50/60Hz
1700W (110VAC)
1.1
Replaceable (Type: 10x5mm) 15A
Hour, minute
0 to 310ºC
4. Information about safety in the use
of the equipment
Hazard
risk
4.1 Risks the user is subjected to
•
Risk of burns
•
Electrical risk
4.2 Staff qualification
This equipment may only be used by properly trained personnel who have
read and understand these instructions or have been properly trained in this
equipment operation.
4.3 Use with hazardous substances
Do not treat flammable or explosive materials or those which chemically react
with violence.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
OCT/2018
(It can be modified without notice)
3000896
1001016
250W (230VAC)
Electric
risk
Page: 8
Risk of high
temperature contact
Tel 34 937 700 877 Fax 34 937 702 362
Publicidad
Tabla de contenido
