Installation; Location; Connection To The Mains - Selecta Electemp Basic Manual De Instrucciones

MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CODIGO 80374 REV 0
to extract samples from inside the equipment.

5. Installation

Unpack the equipment and visually check that the contents are in good con-
ditions. Keep the package for some days.

5.1 Location

Place the equipment on a flat level stable surface, suitable for the equipment
weight.
To work in a comfortable way, please leave a free space of 50cm around the
equipment and a minimum of 20cm at the rear part.
5.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the
connection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency
corresponds to the one indicated in the equipment characteristics plate.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
OCT/2018 (Sujetas a modificaciones sin previo aviso) Pag.: 9
ATTENTION!
Burning risk
Take proper precautions
(use of thermal gloves, clamps,...)
It can be at a high temperature.
Tel 34 937 700 877 Fax 34 937 702 362