Berker 7551 40 01 Instrucciones Para El Uso página 27

Installation GB
The device is snap-fastened on a DIN rail 35 x 7,5 mm as per EN
50022.
The device can only be connected to an analog actuator mod-
ule by means of a 6-pole system connector (supplied with the
analog actuator module).
The EIB analog actuator needs an external 24 V power supply for
operation, e.g. the. power supply unit, e.g order no. 7591 00 01.
This unit can also supply a connected analog actuator module or
other devices.
For easy connection, there are two pairs of internally connected
power supply terminals (marked by a dot "•").