Using The Device For The First Time, Without An Ethernet Cable Connection - Sagem MY DUAL RADIO 700 Guia De Instalacion

Using the device for the first time, without an Ethernet cable connection

Screen on the
right
8
!
Depending on your country configuration, you could have the option to connect to the
internet through a proxy server. If you are connected directly to the internet, select «No».
Otherwise, activate this option and enter the IP address and the port of your proxy server.
9
10
!
If the connection fails, check that your access point does not require a specific
registration procedure. Some access points require, for example, that you press a
specific button during the step 9 above.
11
12
(continued)
Screen shot
8
Next screen
"OK" button
"OK" button Confirm the
settings above.
Apply new settings.
The device is now
in wireless client
mode.
The
already connected
to your network.
Comment
device is