Publicidad
Step 9
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D30)
å
and a DRAWER LEFT (35GD) to the LEFT DRAWER SIDE (D31). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten a PULL (10K) and two PULL MOUNTS (11K) to the DRAWER
å
FRONT (J2). Use two SILVER 5/8" MACHINE SCREWS (15S).
Repeat this step for the other drawer.
å
2
3
SILVER 5/8" MACHINE SCREW
(4 used for the PULLS and PULL MOUNTS)
Page 14
Roller end
1
D31
J2
11K
10K
11K
15S
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D30
3S
10A
Roller end
1
2
3
Publicidad
