Light Bulb Replacement - HOMEDEPOT ES2033 Manual Del Propietário

Operation
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
Main on/off Switch to off and
waiting five (5) minutes before
Maintenance
 
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.

Light Bulb Replacement

Allow at least five (5) minutes for
the light bulbs to cool off before
touching to avoid accidental
burning of the skin. light bulbs
needs to be replaced when you
8
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and contact
your local dealer.
notice a dark section of the flame
or when the clarity and detail of
the log exterior disappears.
there are two (2) bulbs located
under the log Set which generate
the flames and embers.
Tools Required: Phillips
screwdriver
Light Bulb Requirements
Quantity of two (2) clear
chandelier or candelabra bulbs
with an E-12 (small) socket base,
and 25 Watt rating.
To Replace the Light Bulbs
1. Remove the five (5) screws
from the access panel,
located on the back of the
unit, and remove access