Prepare The Site - Kohler K-410 Guia De Instalacion

Finished Wall
1-3/8" (35 mm) Min
2-5/8" (67 mm) Max
2-1/4" (57 mm) Min
3-1/2" (89 mm) Max

1. Prepare the Site

NOTE: The wall plate requires special framing and support
considerations. Pay special attention to minimum and maximum
faucet height recommendations noted in the roughing-in sheet.
Refer to the roughing-in dimensions for additional mounting
information.
A suggested framing example is shown. Each installation may
have different framing requirements than those shown.
Construct the framing for your installation.
2. Attach the Wall Plate
Loosely attach the wall plate to the stud framing with six #10 x 1"
panhead wood screws (not provided).
Verify that the installation is correct and level and firmly secure
the wall plate to the studs.
Kohler Co.
Six Round Holes
(Typical)
Wall Plate
16"
(406 mm)
Screws
5-5/8"
(143 mm)
2x4 Stud
Framing
3 1015916-2-F