Operation; Starting And Stopping The Mower; Switching Off The Mower; Adjusting Cutting Height - GreenWorks Commercial Optimow 33H Manual Del Operario

Operation

STARTING AND STOPPING THE MOWER

Start
b
b
a

SWITCHING OFF THE MOWER

ADJUSTING CUTTING HEIGHT

Stop
a
To start the mower:
1 Insert the safety key and rotate counter clockwise to position "1" .
2 Slide the START button latch backwards.
3 Press down the START button.
To stop the mower:
Press the STOP button on the mower.
Press the STOP button on the mower and remove the safety key.
WARNING! Always remove the safety key when performing
maintenance or if the mower must be moved.
For the first few weeks of mowing, set the cutting height to at least
2.4 inch to avoid cutting the boundary wire and guide wire. Lower the
setting one step each week thereafter until the desired cutting height is
reached.
Turn the cutting height adjustment knob to the required setting. The
selected setting is the marking on the body that aligns with the arrow
on the knob.
Turn clockwise to increase the cutting height.
Turn anti-clockwise to decrease the cutting height.
The cutting height for the mower can be adjusted between 0.8 inch and
2.4 inch for model 33 and 66 and 2.4 to 4 inch for model 33H and 66H.
EN
19
Version 3 - 2021.03.11