How Do I Activate The Finder; How Do I Turn On The Finder - PAJ EASY FINDER Manual Del Usuario

3 seconds. The FINDER gives feedback through a vibration by
switching off. When the FINDER is switched off, the LEDs
continue to shine for approx. 1-2 minutes to transmit a last
position.
The EASY Finder 4G offers, with an active tracking time of
approx. 1 hour per day, a battery life of approx. 7 days
without intermediate charging! However, it should be noted
that the duration depends on the load. The more PAJ's EASY
Finder 4G is moved and the more alerts are sent, the higher

1.4 How do I activate the FINDER?

In order to be able to use the PAJ GPS FINDER, it is necessary to
first activate the device online.
Note: To activate the device you need the ID of your FINDER.
These can be found on the barcode stuck on the device.
www.finder-portal.us/go

1.5 How do I turn on the FINDER?

Once the activation has been successful, you can switch on the
FINDER. The button with the ON / OFF button is used to switch
the FINDER on and off. To do this, press this button for at least
3 seconds.
For the initial startup of the EASY Finder 4G uncovered
locations, such as the garden or the terrace (i. e. not inside
the home, the garage, the cellar or the like) are
the utilization.
Please follow
for activation.
recommended.
EASY Finder 4G by PAJ GPS V.1.0 US
© PAJ GPS Inc.
6