Cycle Modifier Buttons - Kenmore 796.8884 Serie Guia De Uso Y Cuidado E Instrucciones De Instalacion

CYCLE MODIFIER BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize these settings
using the cycle modifier buttons.
SENSOR DRY cycles have preset settings that are
selected automatically and cannot be changed.
MANUAL DRY cycles have default settings, but you may
also customize the settings using the cycle modifier
buttons.
Press the button for the desired modifier until the indicator
light for the desired value is lit.
A
DRY LEVEL
Selects the level of dryness for the cycle. Press the
DRY LEVEL button repeatedly to scroll through
available settings.
• This option is only available with MANUAL DRY
cycles.
• The dryer will automatically adjust the cycle time.
Selecting VERY DRY or MORE DRY will increase
the cycle time, while LESS DRY or DAMP DRY will
decrease the cycle time.
• Use a LESS DRY or DAMP DRY setting for items
that you wish to iron.
HOW TO USE
A B
22
NOTE: To protect your garments, not every dryness level,
temperature, or option is available with every cycle. See
the Cycle Guide on page 19 for details.
C
B
TEMP CONTROL
Adjusts the temperature setting from ULTRA LOW to
HIGH. This allows precise care of your fabrics and
garments. Press the TEMP CONTROL button
repeatedly to scroll through available settings.
C
TIMED DRY
Allows you to manually select the drying time in
10-minute increments. Use this cycle for small loads
or to remove wrinkles. Use the MORE TIME/LESS
TIME buttons to add or reduce the drying time in
1-minute increments.
D
CYCLE SIGNAL
Adjusts the volume of the end-of-cycle signal or
turns off the signal. Press button repeatedly until
the desired volume is shown on the display.
D