Before Starting Up; Starting Up - Comedes Lavaero 1200 Manual Del Usuario

Ocultar thumbs Ver también para Lavaero 1200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62

Before starting up

Remove the filter element from the unit, remove the protective film and reinsert it into the
unit. Follow the steps in the chapter "Filter change". The combination filter should normally be
changed every 6-9 months.

Starting up

Inserting the device
When you plug in the device, the ready status is indicated acoustically and the power LED
lights up.
Caution: Never insert or remove the device with wet hands.
POWER
The power switch is used to turn the unit on and off.
(The symbol lights up red in standby mode and orange when switched on).
The device always starts in automatic mode.
AUTO
Press the "AUTO" button to start the automatic mode. In this mode, the fan level
is automatically selected depending on the air quality. If the mode is active, the
"AUTO" button lights up. The ionizer is turned on in this mode. However, the
ionizer can be switched off by pressing the "ION" key.
To switch from automatic mode to manual mode, press one of the two "SPEED"
buttons.
To switch from automatic mode to turbo mode, press the turbo button.
air quality
Very good
normal
timer
With the timer you can set the running time of the device. Times between 1 and
12 hours can be selected. If the display shows 12 and you press the button
again, the timer is switched off.
When the time has elapsed, the unit switches off automatically.
If the timer is active, the corresponding key lights up and the remaining running
time is shown on the display.
ion
This switch switches the ionizer on and off.
If the ionizer is switched on, the corresponding key lights up.
EN-8
PM2.5
(µg/m³)
1-70
good
71-180
181-300
Bad
301-500
Display
fan stage
green
Blue
Yellow
red
www.comedes.com
2
3
4
5

Publicidad

Tabla de contenido
loading

Tabla de contenido