Troubleshooting - Hama 4K HDMI Instrucciones De Uso

5. Functions
• Easy to switch between up to 3 HDMI SWITCHs (e.g. Blu-ray
player, receiver, computer, games console)
• Quick and easy switching using a remote control
• Automatic selection of the input SWITCH when switching on
• No additional power supply required, the power is supplied via
the connected devices
• Supports 3D and 4K Ultra-HD resolution
6. Getting started and operation
• Connect the SWITCH devices (e.g. Blu-ray player, receiver,
computer, games console) to the HDMI inputs (input 1-3) using
HDMI cables (not included in the delivery package). The LED that
corresponds to the active input (1) lights up.
• Now connect your output device (e.g. TV, projector, monitor)
to the HDMI outputs using HDMI cables (not included in the
delivery package).
• Turn on the connected devices. The power LED (2) lights up.
• You can now select all inputs via the remote control.
• It is also possible to select the SWITCH directly on the HDMI
switching desk using the SWITCH button (4).
Information about the power supply
In some cases, it may be necessary to provide the HDMI
switching desk with additional power via the USB socket (5). To
do this, connect a micro USB / USB cable to the USB socket (5)
and a free USB port on your TV or a USB power adapter (5 V /
300 mA, not included in the delivery package).

7. Troubleshooting

Problem Solution
No picture • Ensure that all cables are correctly connected.
• Check to be sure that all devices are
switched on.
• Make sure that the TV is set to the correct
channel.
• Connect the HDMI switch to the USB power
supply.
• In some cases, it may be necessary to provide
the HDMI switching desk with additional
power via the USB socket (5).
Poor picture, • Ensure that all cables are correctly connected.
audio inter- • Try to connect the HDMI SWITCH directly to the
ruptions output device. If nothing changes, you need to
replace the SWITCH device.
• Use a 1.4 HDMI cable
• Your HDMI cable should not exceed a total
length of 5 m.
• Switch all devices off and then on again.
8. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents.
9. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
10. Technical Data
3 HDMI inputs
Connections
1 HDMI output
Supported 480i/480p/576i/576p/720p/
resolutions 1080i/1080p/4Kx2K
HDCP version Compatible with HDCP 1.4 / 2.2
DSD (Direct Stream Digital),
Supported audio
HD (HBR) Audio,7.1/5.1/2.1 CH, Dolby
formats
Audio, DTS, LPCM
Supported video 12bit Full HD Video, 3D Video,
formats 4Kx2k@30/60 Hz Ultra HD Video
Manually via the button on the device,
SWITCH
automatically when switching on or via
selection
remote control
From SWITCH device (HDMI input) via
Power supply
USB (5 V/300 mA)
11. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of
with household waste. Consumers are obliged by law
to return electrical and electronic devices as well as
batteries at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are de-
ned by the national law of the respective country. This symbol on
the product, the instruction manual or the package indicates that
a product is subject to these regulations. By recycling, reusing the
materials or other forms of utilising old devices/Batteries, you are
making an important contribution to protecting our environment.
3