Processing Using Chopping/Mixing Blade
The chopping/mixing blade can be
used to coarsely chop, finely mince,
mix, or puree food to a smooth
consistency.
1. Make sure the control switch is turned
to OFF (O) and the unit is unplugged.
2. Lock the bowl onto base. (See "How
to Lock the Bowl" on page 5.)
3. Place the chopping/mixing blade
onto motor shaft of food processor in
center of bowl. Turn slowly until blade
drops into place. Handle carefully:
the blade is sharp.
Chopping/
Mixing Blade
6
840249200 ENv02.indd 6
840249200 ENv02.indd 6
4. Lock cover onto bowl. (See "How to
Lock the Cover" on page 5.) Insert
food pusher into food chute.
5. Plug in unit and process food.
The processing time will determine
the finished consistency of the food.
The Pulse setting can help you avoid
overprocessing.
WARNING! Cut Hazard: Always use
food pusher to feed food into the
chute. Never push food through chute
with hands or fingers. Wait until blade
has stopped spinning before removing
cover.
Motor
Shaft
6/10/14 10:12 AM
6/10/14 10:12 AM