Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
After-sale Support
Feedback
Warranty
Unpacking
Thermo Scientific
Thermo Fisher Scientific is committed to customer service both during
and after the sale. If you have questions concerning the bath operation,
or questions concerning spare parts or Service Contracts, call our Sales,
Service and Customer Support phone number, see this manual's inside
cover for contact information.
There can be up to three nameplates located on the rear of the bath.
Before calling, please obtain the serial number printed on the complete
system nameplate located on the upper rear of the bath.
We appreciate any feedback you can give us on this manual. Please e-mail
us at tcmanuals@thermofisher.com. Be sure to include the manual part
number and the revision date listed on the front cover.
Thermo Scientific Laboratory Temperature Control Products have a
warranty against defective parts and workmanship for 36 months from date
of shipment. See back page of this manual for more details.
Retain all cartons and packing material until the bath is operated and found
to be in good condition. If the bath shows external or internal damage
contact the transportation company and file a damage claim. Under ICC
regulations, this is your responsibility.
If an immersion circulator was purchased without a bath, carefully remove
the label and small piece of Styrofoam securing the float switch before
using.
Refrigerated baths should be left in an upright position for 24 hours
before starting. This will ensure the lubrication oil has drained back
into the compressor.
Sample Nameplate
Preface
vii
Publicidad
Tabla de contenido
