Portfolio 16065 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
1. Insert long machine screws (DD) into the
mounting bracket (EE). Connect the mounting
bracket (EE), with short machine screws (BB),
to the outlet box. Orient the mounting bracket (EE)
so that the raised center portion protrudes into the
outlet box. (See Fig.1.)
Hardware Used
Short Machine
BB
Screws
Long Machine
DD
Screws
Mounting
EE
Bracket
2. Ground wire connection guide (see Fig. 2.):
• For installation in the United States:
Wrap ground wire from outlet box around
ground screw (FF) on mounting bracket (EE),
no less than 2 in. from wire end. Tighten
ground screw (FF). Connect fixture and
driver's ground wire to outlet ground wire
with an extra wire connector (not included).
• For installation in Canada:
Wrap fixture and driver's ground wire
around ground screw (FF) on mounting
bracket (EE). Tighten ground screw (FF).
Hardware Used
Mounting
EE
Bracket
Ground
FF
Screw
x 2
x 2
x 1
GND
x 1
GND
1
Outlet Box
(Not Included)
2
FIXTURE
GROUND
DRIVER
GROUND
5
EE
FF
EE
GND