Portfolio 16065 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
3. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),
following the reference chart listed below.
CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO:
* Parallel Cord (round & smooth)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor.
*NOTE:
When parallel wire (SPT I & SPT II) is used.
The neutral wire is square shaped and ridged
and the hot wire will be round in shape and
smooth. (See Fig. 3.)
Hardware Used
AA Wire Connectors
4. Pass the canopy (A) over the long
machine screws (DD) protruding from the
mounting bracket (EE) and secure in place
with threaded knobs (CC). (See Fig. 4.)
Hardware Used
Threaded
CC
Knobs
Long
Machine
DD
Screws
Mounting
EE
Bracket
Black
x 2
x 2
x 2
x 1
GND
CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with Silver metal conductor.
4
DD
CC
6
White
3
EE