Single Phase - VESTEL Klefr 6924 Guia De Instalacion

First digit: Program status (0 fail / 1 passed)
Second digit: Eeprom status (0 fail / 1 passed)
Third digit: Phase A status (0 not available / 1 available)
Fourth digit: Phase B status (0 not available / 1 available)
Fifth digit: Phase C status (0 not available / 1 available)
If the first or second digit shows a 0 (zero); then please return the meter, as the meter is
malfunctioning.
If the third, fourth or fifth digit shows a 0 (zero); please check the wiring for power issues.

4.2- SINGLE PHASE

It could be that one of the following errors is displayed on the meter:
Display shows
Err 01
Err 02
For smart charging station models (with display), due to any fault you can see the screen "Out of
order!" of charging station. Also the status information LED is constant red.
When error indications appear on the charging station, please check the installation steps. If the
situation continues you can also see the IB document of the charging station EVC04.
Kind of errors
EEPROM error
Program code checksum error
© 2021 Vestel - All rights reserved
Recommended solution
Please contact technical support for
a meter replacement.
Please contact technical support
for a meter replacement.
English - 10