Assembling The Appliance - Yamato 51206 Manual De Instrucciones

case of misuse. The user/operator - not the manufacturer - will be liable for any damage or
injuries caused as a result thereof.
Please note that our appliance has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the appliance is used in commercial,
trade or industrial businesses or for equivalent purposes.
5. Technical data
Mains voltage: 220-240V~ 50-60 Hz
Code Power input
51206 1200W
6. Before starting the appliance
Important!
Before you connect the appliance to the mains supply make sure that the data on the
l
rating plate are identical to the mains data.
The appliance may only be connected to a shockproof socket.
l

6.1 Assembling the appliance

Fitting the appliance head (Fig. 2-3)
The appliance head (3) is fastened to the container (6) by the locking hook (5). To
l
remove the appliance head (3), open the locking hook (5) and remove the appliance
head (3). When fitting the appliance head (3), make sure that the locking hook (5) locks
into place correctly.
Plug the vacuum tube (8) onto the end of the suction hose (9).
l
Fit the suction hose (9) onto the connection (7) and turn until securely attached.
l
6.2 Fitting the filter
Important!
Never use the ash vacuum without the filter!
Always ensure that the filters are perfectly secure.
Dismantling/Assembly of the filter (Fig. 6-7)
Remove the filter cartridge (10) from the appliance head (3)
7. Operation
7.1 ON/OFF switch (Fig. 1)
Tank volume Weight:
15 L 3.3 kgs